Parameters
4.8 Logic modules
SIMOCODE pro - Parameterize
256 Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
Limit monitor
Description
With the limit monitor, any analog values (2 bytes / 1 word) can be monitored for limit
overshooting or limit undershooting The limit monitor issues the "Limit" signal at its socket. In
addition, limit monitors can be "marked" according to their function.
Example: Monitoring the individual sensor measuring circuits of the temperature module
(Temperature 1 to 3) for overtemperature.
The limit monitor consists of:
● one analog plug
● one logic component
● one socket
The following are available:
● four limit monitors (1 to 4) for the SIMOCODE pro V PB and pro V MB RTU basic units
● six limit monitors (1 to 6) for the SIMOCODE pro V PN and pro V EIP basic units
To Next Page
Loading...
