Siemens SIMOCODE pro Operating Manual

Parameters
4.8 Logic modules
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
237
4.8.3
Truth table for 2I / 1O
Description
The truth table for 2I / 1O consists of:
● Two plugs
● one logic component
● one socket.
You can choose which of the four possible input conditions an output signal should be
generated for.
In total, two truth tables (7 to 8) are available.
Schematic
The following schematic shows the "Truth Table for 2I / 1O" logic modules:
Figure 4-92 "Truth Table for 2I / 1O" logic modules

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000