Parameters
4.4 Outputs
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
177
The "Cyclic Send" function blocks allow you to specify the information to be transferred
cyclically to the automation system via the communication bus.
"Cyclic send" function blocks consist of
● 16 bits (two bytes, byte 0 and byte 1 for binary information)
● up to nine words (= 18 bytes, for up to nine analog values, freely parameterizable).
A total of five "Cyclic Send" function blocks (0, 1, 2/3, 4/9, 10/19) are available.
The following schematic shows the "Cyclic send" function blocks:
Figure 4-56 Schematic of the "Cyclic send" function blocks
To Next Page
Loading...
