Siemens SIMOCODE pro - Application Selection, Settings and Definitions of Control Functions

Parameters
4.2 Motor control
SIMOCODE pro - Parameterize
66 Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
4.2.2.2
Application selection, settings and definitions of control functions
Application selection
If you select and load a preset application via the "Add new device" command (e.g. the
reversing starter) in SIMOCODE ES, all protective functions, links and interlocks for the
reversing starter are set up in the basic unit. These can be flexibly adapted and expanded.
Figure 4-12 Application selection with SIMOCODE ES