Siemens SIMOCODE pro Operating Manual

Parameters
4.8 Logic modules
SIMOCODE pro - Parameterize
232 Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
4.8
Logic modules
4.8.1
Overview of logic modules
Description
Freely programmable logic modules are function blocks that process input signals and
supply binary or analog output signals according to their internal logic components. Logic
modules can contain:
● Plugs
● An internal logic component
● Sockets
● Settings, e.g. the time for a timer.
Schematic
The following schematic shows a general representation of a logic module:
Figure 4-88 General representation of a logic module

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000