Siemens SIMOCODE pro - Page 142

Parameters
4.3 Monitoring functions
SIMOCODE pro - Parameterize
142 Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
Response to warning level
Here you can set how SIMOCODE pro should respond if the warning level is undershot. See
also "Tables of responses of SIMOCODE pro" in Chapter Important information (Page 7).
Table 4- 39 "Warning level" response for voltage monitoring
Response
Warning level
disabled
X (d)
signaling X
warn
X
tripping
—
delay
0 to 25.5 s (default: 0.5 s)
Hysteresis for voltage, cos phi, power
Here you can set the hysteresis for voltage, cos phi and power.
Hysteresis for voltage, cos phi, power
0
to 15% of the level value in steps of 1%
(default: 5 %)