Parameters
4.3 Monitoring functions
SIMOCODE pro - Parameterize
144 Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
Active status of trip and warning levels
The trip level / warning level is active only when the motor is running, the startup procedure
has been completed and there is no test position feedback (TPF) (run+).
Here you can define how SIMOCODE pro will respond if the set trip level is undershot:
See also "Tables of responses of SIMOCODE pro" in Chapter Important information
(Page 7).
Table 4- 40 "Trip level" response for cos phi monitoring
signal X
0 to 25.5 s (default: 0.5 s)
Response to warning level
Here you can define how SIMOCODE pro will respond if the set warning level is undershot.
See also "Tables of responses of SIMOCODE pro" in Chapter Important information
(Page 7).
Table 4- 41 "Warning level" response for cos phi monitoring
Deactivated X (d)
0 to 25.5 s (default: 0.5 s)
To Next Page
Loading...
Need help?
General
