Parameters
4.5 Inputs
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
183
Inputs are used, for example, to input external signals e.g. via pushbuttons, key-operated
switches, etc. These external signals are processed further internally via appropriate
connections. The system has different inputs depending upon the device series:
Table 4- 58 Inputs
Basic unit inputs (BU Inputs)
Operator panel buttons (OP Buttons)
Digital module 1 inputs (DM1 Inputs) — ✓
1)
✓ ✓ ✓ ✓
Digital module 2 inputs (DM2 Inputs)
Temperature module inputs (TM
— ✓ ✓ ✓ ✓ ✓
Analog module inputs (AM Inputs)
Acyclic receive (Acycl. receive)
Cyclic receive (Cycl. receive)
Ethernet - OPC-UA Receive
1) for the SIMOCODE pro S basic unit, the inputs and the temperature input are on the
multifunction module.
To Next Page
Loading...
Need help?
General
