Siemens SINAMICS S110 - Mounting

Power components on the motor side
6.1 Motor reactors
SINAMICS S110
Manual, 07/2015, 6SL3097-4AC10-0BP5
125
Motor reactors 6SE6400-3TC14-5FD0 for PM240-2, FSE
①
PE terminal M8 x 16
Figure 6-6 Dimension drawing motor reactors for PM240-2, FSE, all data in mm and (inch)
6.1.4
Mounting
The motor reactors for Power Modules PM240-2, frame sizes FSA to FSE, are dimensioned
for installation in cabinets. The motor reactor is installed on the mounting surface next to the
Power Module.
Table 6- 1 Mounting of motor reactors for PM240-2 Power Modules
Frame size
Fastening
Tightening torque
FSA 4 x M4 screws
4 x M4 nuts
4 x M4 washers
3 Nm
FSB
4 x M5 screws
4 x M5 nuts
4 x M5 washers
5 Nm
FSC
FSD 4 x M6 screws
4 x M6 nuts
4 x M6 washers
8 Nm
FSE 4 x M8 screws
4 x M8 nuts
4 x M8 washers
10 Nm