CU305 Control Units
7.7 Installation
SINAMICS S110
Manual, 07/2015, 6SL3097-4AC10-0BP5
163
Snap-mounting the CU305 onto the Power Mod-
Power Module (frame size FSA) with CU305
The procedure when mounting the Control Unit on the Power Module is independent of the
frame size of the Power Module.
Removing the Control Unit
Figure 7-14 Removing the CU305 from the Power Module (frame size FSA)
To remove the Control Unit from the Power Module, press the blue release lever, shown in
the diagram, downward and swing the Control Unit out to the front.
To Next Page
Loading...
