Accessories
9.1 DRIVE-CLiQ cabinet bushing
SINAMICS S110
218 Manual, 07/2015, 6SL3097-4AC10-0BP5
DRIVE-CLiQ cabinet bushing for cables with M12 plug/socket
Prepare the cabinet panel for mounting the DRIVE-CLiQ cabinet bushing M12 as shown
below. The removable O ring can be screwed from the inside or the outside.
Mounting from the inside using an O ring that can be screwed
Through-hole with chamfer
Figure 9-7 Through-hole for mounting the DRIVE-CLiQ cabinet bushing M12 with an O-ring that can
be screwed from the inside
Mounting from the outside using an O ring that can be screwed
Threaded hole with chamfer
Figure 9-8 Threaded hole for mounting the DRIVE-CLiQ cabinet bushing M12 with an O-ring that
can be screwed from the outside
To Next Page
Loading...
