Siemens SINAMICS S110 - Spring-type terminals;screw-type terminals

Annex
A.3 Spring-type terminals/screw-type terminals
SINAMICS S110
Manual, 07/2015, 6SL3097-4AC10-0BP5
263
A.3
Spring-type terminals/screw-type terminals
Conductor cross sections that can be connected to the spring-loaded terminals
The type of spring-loaded terminal can be taken from the interface description of the
particular component.
Table A- 1 Spring-loaded terminals
Spring-loaded terminal type
Conductor cross sections that can be
connected
Rigid
Flexible
Flexible with end sleeve without plastic sleeve
Flexible with end sleeve with plastic sleeve
AWG/kcmil
0.2 … 1.5 mm
2
0.2 … 1.5 mm
2
0.25 … 1.5 mm
2
0.25 … 0.75 mm
2
24 … 16
Stripped lengths 10 mm
Tool
Screwdriver 0.4 x 2.0 mm
Conductor cross sections that can be connected to the screw-type terminal
Table A- 2 Screw-type terminal
Screw-type terminal
Conductor cross sections that can be
connected
Rigid
Flexible
Flexible with end sleeve without plastic sleeve
Flexible with end sleeve with plastic sleeve
AWG/kcmil
0.2 … 2.5 mm
2
0.2 … 2.5 mm
2
0.2 … 2.5 mm
2
0.2 … 1.5 mm
2
22 … 12
Stripped lengths
6 … 7 mm
Tool
Screwdriver 0.5 x 3 mm
Tightening torque
0.4 to 0.5 Nm