CU305 Control Units
7.6 Dimension drawings
SINAMICS S110
Manual, 07/2015, 6SL3097-4AC10-0BP5
161
Damage to the 5-V encoder when connecting to 24 V
Connecting a 5 V encoder to a 24 V supply can result in damage to the encoder
electronics.
• Only connect an encoder to 24 V that is rated for a voltage of 24 V.
Dimension drawing, CU305 PN
Figure 7-12 Dimension drawing of Control UnitCU305 PN, all data in mm and (inches)
To Next Page
Loading...
