Siemens SINAMICS S110 - Mounting frame

Accessories
9.3 Mounting frame
SINAMICS S110
222 Manual, 07/2015, 6SL3097-4AC10-0BP5
Installation
1. Attach the DRIVE-CLiQ coupling to the mounting surface as shown in the drilling pattern.
2. Remove the protective caps of the DRIVE-CLiQ coupling.
3. Latch the DRIVE-CLiQ connectors at both sides of the DRIVE-CLiQ coupling.
9.2.6
Technical data
Table 9- 2 Technical data
DRIVE-CLiQ coupling 6SL3066-
2DA00-0AB0
Unit
Weight
kg
0,272
Degree of protection IP67 acc. to EN 60529
9.3
Mounting frame
9.3.1
Description
With the use and proper installation of Siemens mounting frames, the Power Modules Push
Through achieve degree of protection IP55.
Article Nos.
● FSA: 6SL3260-6AA00-0DA0
● FSB: 6SL3260-6AB00-0DA0
● FSC: 6SL3260-6AC00-0DA0
The accessories package contains all the necessary nuts and seals.