Commissioning Manual
01/2017
191
Status display during the tool change
Assigned global variables
Mark for turret CW rotation
Mark for turret CCW rotation
Mark for manual tool change
Current tool number is not 0
Direction for searching for an adjacent tool
Relevant PLC machine data
Monitoring time for searching for a tool
14512 [21].1 - Switch of the I/O interface (0: set I0.0 to I2.7/Q0.0 to Q1.7 as the standard I/O wir-
ing in the default PLC; 1: set I6.0 to I8.7/Q4.0 to Q5.7 as the standard I/O wiring in
Example for calling subroutine 53
To Next Page
Loading...
Need help?
General
