Commissioning Manual
01/2017
387
Overload capability
The overload capability is 150% by default. It can be set up to
200% via p0640, but the corresponding overload duration might
be reduced under the circumstances.
Protective functions Earthing fault protection, output short-cut protection, overvolt-
age/undervoltage protection
2)
, I
2
t detection, IGBT overtempera-
Environmental
conditions
Surrounding air
temperature
Operation 0 °C to 45 °C: without power derating
45 °C to 55 °C: with power derating
Storage -40 °C to +70 °C
Ambient humidi-
ty
Operating environment Indoor (without direct sunlight), free from corrosive gas, combus-
tible gas, oil gas, or dust
Altitude < 1000 m (without derating)
To Next Page
Loading...
Need help?
General
