Power-On and Power-Up
5.4 Service Desktop
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
135
5.4 Service Desktop
The Service Desktop is intended for machine manufacturer/service personnel. Numerous
SINUMERIK-specific applications are available on the Service Desktop in addition to the
standard Windows functions.
5.4.1 Activating
Proceed as follows to enable the Service Desktop:
1. As soon as (1) is displayed under the version number on the bottom right of the startup
screen, press the key "3".
9
1
Figure 5-2 Display during startup of the SINUMERIK 840Di sl
2. Enter a password for protection levels 0-2:
Protection level Password Area
0 Reserved Siemens
1 SUNRISE (default) Machine manufacturer
2 EVENING (default) Commissioning, service
1. Click the "Service Desktop" button in the displayed selection menu or press the "Return"
key.
To Next Page
Loading...
