Hardware Descriptions
2.4 Cable distributor
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
65
2.4 Cable distributor
Order Number
Description Order number (MLFB)
Cable distributor 6FX2 006-1BA02
Cable connection
The cable distributor consists of a connector jacket for a 37-pin Sub-D connector with
enlarged interior. The cable distributor is used to split the I/O-MPG-extension interface (X121)
to a maximum of 7 single cables. These must be connected in the order shown in Table
"Plug assignment".
To supply the digital outputs, an external 24 V supply is possible at the cable distributor.
&DEOH
);$$MMM
&DEOH
);$$MMM
Figure 2-10 Cable distributor
To Next Page
Loading...
