Software installation/update and data backup
16.1 PTP network connection
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
557
Directory sharing
Release for network access takes place in the Properties dialog > "Sharing" tab of the
corresponding directory (selection of the directory with the right mouse key)
The directory name is the default name for sharing. If a different sharing name is specified, it
must be stated on activating the directory connection.
Authorization
To allow files to be created in the directory, the appropriate authorization must be set.
Dialog
Dialog: <
Directory
> Properties
Tab: Sharing
☑ Share this folder on the network
☑ Allow network users to change my files
OK
16.1.4 Configuring the PCU
The PCU basic software is preconfigured for a PTP network link with the TCP/IP protocol. It
is not possible to establish a network link if changes were made and the following settings
must be made or checked according to Subsection "Configuring External Computer
(Windows XP)":
● TCP/IP protocol
● IP address and subnet mask
● Computer name and workgroup
To Next Page
Loading...
