PLC commissioning
6.1 General
Manual
154 Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Processing modules
The individual blocks in the basic PLC program can be processed in the SIMATIC manager:
● Select the appropriate block, e.g. OB 100 in the folder blocks of the corresponding
module
● Use the menu command Edit > Open Object to open the block or double-click the block
with the left mouse button
● Processing the blocks in the KOP/AWL/FUP Editor
Switching the block view via the menu command View > KOP or AWL or FUP
To Next Page
Loading...
