Siemens SINUMERIK 840Di sl - 5.2 Tool offset

PLC commissioning
6.3 Creating a SIMATIC S7 project
Manual
174 Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
NOTICE
The MAC address, IP address and subnet mask in the figure above are only sample
values!
4. The configured Ethernet interface must be assigned to an interface parameterization of
the PG/PC. Select the "Assignment" (1) tab.
Select the configured "Ethernet (1)" (2) interface from the "Configured interfaces" list and
the Ethernet interface for connecting to the PCU from the "Interface parameterization in
the PG/PC" list. In the example: "TCP/IP -> Realtek RTL8139..." (3).
NOTICE
Do not select ISO interfaces as Ethernet interfaces from the "Interface parameterization
in the PG/PC" list, e.g. "ISO Ind. Ethernet - Realtek RTL8139...". Instead, use the
appropriate TCP/IP interfaces, e.g. "TCP/IP - Realtek RTL8139...".
Click on the "Assign" button to assign the interface (4).
Confirm the "Edit object properties" dialog by clicking on OK.
3URSHUWLHV3*3&
*HQHUDO,QWHUIDFH$VVLJQPHQW
1RWDVVLJQHG
&RQILJXUHG,QWHUIDFHV
1DPH7\S6XEQHW
(WKHUQHW,QWHUIDFH,QGXVWULDO(WKHUQHW(WKHUQHW
,QWHUIDFHSDUDPHWHUL]DWLRQLQ3*3&
7&3,3!1GLV:DQOS
7&3,3!5HDOWH[57/[)
7&3,3$XWR!,QWHO5352:LUHOHVV
7&3,3$XWR!5HDOWH[57/
$VVLJQLQJ
5HPRYH
$VVLJQHG
,QWHUIDFH3DUDPHWHUL]DWLRQ6XEQHW62QOLQH
621/,1(DFFHVV
DFWLYH
2.
&DQFHO+HOS




The list "Assigned" now contains the Ethernet interface (1). If several interfaces are
assigned, make sure that the interface to be used for communication, "Ethernet (1)" in
this case, is active. To do this, select the interface (Ethernet (1)) and activate the S7
online access for this interface (2). Click OK to confirm the dialog.