Siemens SINUMERIK 840Di sl - 7.4 Transfer display MD from HMI Embedded

NC Commissioning with HMI Advanced
11.3 System data
Manual
380 Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Lower limit
The minimum tool path or axis velocity at which traversing is possible results from:
9
PLQ
ุ


FDOFXODWLRQSUHFLVLRQ> @,327DNW>V@

LQFU
PPRUGHJUHHV
(for the computational resolution, see Subsection "Resolutions" (Page 365))
If V
min
is not reached, no traversing movement is carried out.
References:
/FB/ Function Manual - Basic Functions, G2 Velocities, Traversing Ranges, Accuracies,
Subsection "Velocities"