Description
3.6 Combined operation
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
49
Table 3- 12 Plug & Measure - AM slot change
Data synchronization/Action
Un-
changed
AM1 →
AM2
AM2 →
AM1
Internal swapping of modules be-
tween slots is not permitted!
Install the modules once again in
their previous slot and restart the
None
Un-
changed
AM1 = 0
AM2 →
An AM is removed.
Retrofitting: Remaining AM is insert-
ed in the slot that has opened up
Automatic data synchronization, no
action required by user.
To Next Page
Loading...
Need help?
General
