Siemens TIM 1531 IRC User Manual

Block library TeleControl ST7
5.7 Master copies
TIM 1531 IRC
150 Operating Instructions, 02/2018, C79000-G8976-C468-02
Processing not enabled
•
With sending process typicals
(Bin04B_S, Ana04W_S, Cnt01D_S/Cnt04D_S,
Set01W_R, Par12D_R
,
Dat12D_S, Dat256D_S)
If processing is not enabled, the block can only communicate at the
organizational level; in other words, Org frames can be sent and received.
Please note: Although a query from an operator typical is answered,
however the reply frame contains the data valid at the time the function
was disabled.
Note
The response described here does not apply to Cmd01B_R, (see
Command typical Cmd01B_R (Page 173))!
•
With receiving operator typicals
(Bin04B_R, Ana04W_R, Cnt01D_R/Cnt04D_R,
Set01W_S, Par12D_S
,
Dat12D_R, Dat256D_R)
If processing is not enabled, the block can only communicate at the
organizational level; in other words, Org frames can be sent and received.
Please note: A request can still be sent and the answer received, the
received information is, however, not output to the outputs. You will find the
relevant outputs in the description of the appropriate data point typicals.
Note
The response described here does not apply to Cmd01B_S, see
Command typical Cmd01B_S (Page 171)!
ImageMemory
Parameter:
ImageMemory
Declaration:
INPUT
Data type:
BOOL
Range of
values:
TRUE / FALSE
Default:
TRUE
Address
range:
Input
I 0.0 ... I n.7
Memory bit
M 0.0 ... M n.7
L 0.0 ... L n.7
Data bit
DBm.DBX 0.0 ... n.7
Using in typ
i-
cals
Bin04B_S, Ana04W_S, Cnt01D_S/Cnt04D_S, Set01W_R, Par12D_R,
Dat12D_S, Dat256D_S

Siemens TIM 1531 IRC Specifications

General

Brand	Siemens
Model	TIM 1531 IRC
Category	Controller
Language	English