Siemens TIM 1531 IRC - Page 334

Glossary
TIM 1531 IRC
334 Operating Instructions, 02/2018, C79000-G8976-C468-02
connection is established to the partner for whatever reason. This can, for example, be the
situation when information with higher priority needs to be sent or when the partner
establishes a connection to exchange data.
ST7 protocol
→ SINAUT ST7
ST7cc
→ SINAUT ST7cc
ST7sc
→ SINAUT ST7sc
ST7-TIM:
→ TIM
Station
● Hardware
SIMATIC controller with the required components for acquisition, processing and
communication, consisting of: CPU, I/O modules, communication module, modem, etc.
● Network node type
Setting a WAN interface of the TIM. An interface of the "Station" network node type
communicates at the lowest hierarchy level in a SINAUT network.
Subcycle
→ Main cycle / sub-cycle
TD7 software
→ SINAUT TD7 Library
TIM
Telecontrol Interface Module
Communication module that handles all data transmission functions provided by the SINAUT
system independently.