Siemens TIM 1531 IRC User Manual

Configuration
4.8 Parameters of WAN networks
TIM 1531 IRC
66 Operating Instructions, 02/2018, C79000-G8976-C468-02
Dial-up network options
●
Cancel parameter
Number of dialing attempts with unavailable partner until the attempts to establish the
connection are finally ended. (0 .. 127)
– 1 ... 127: Final abort when attempted calls failed n times (no connection or no data
transfer).
– 0: Final abort when a connection was established 127 times without data transfer.
●
Redial
Number of attempted calls until a disruption is reported.
●
Network password
Formerly "Customer identification"
The parameter ensures that connections in dial-up networks are made only to configured
partners.
Range of values: 1 ... 127
Default setting: 0
Time-of-day synchronization
● Enable time-of-day synchronization for WAN
When the parameter is enabled, you specify whether the time for the time-of-day
synchronization of the connected stations should be transmitted via the WAN network.
You specify the synchronization cycle if the parameter is enabled.
Note
Transfer of the setting by stations
The connected TIM modules adopt the settings made here on the network.
Station list
This is where you can find an overview table of the stations connected to the network with
their most important parameters.

Siemens TIM 1531 IRC Specifications

General

Brand	Siemens
Model	TIM 1531 IRC
Category	Controller
Language	English