Silca UC 199 - Technical Data

1.5 TECHNICAL DATA
Electricity supply:
230V - 50Hz
100V - 50/60Hz (UC199 Japan)
Maximum absorbed power:
230V: 2,1 Amp. 300 Watt
100V: 3,3 Amp. 200W
Cutter motor:
single phase and speed
Cutter:
hard metal (carbide)
Tool speed:
50Hz: 2110 rpm
60Hz: 2530 rpm
Movement:
on2axeswithballscrewsactivatedbystepmotors,onrectiedrollerguidesandballbushes.
Standard clamp UC199:
universal4sidedclamptogripat,carandcruciformkeys
UC199 Japan clamp:
4sidedclamptogripat,car,cruciformkeysandMIWAkeys
Automatic clamp (with optional Loader Unit)
Automatictogripatkeys(seeFig.2)
Runs:
X axis: 74 mm Y axis: 45 mm
Dimensions:
width: 396 mm (with optional key tray: 458 mm) depth: 543 mm height: 386 mm (with raised shield 590 mm)
Mass:
Kg. 50
Noise level:
sound pressure Lp(A) = 83 dB(A) (cutting steel keys)
78 dB(A) (cutting brass keys)
CLASS 1 LASER READER:
• Maximum radiation with safety lock excluded: 170 µW
• Wave length: 785 µm (invisible)
• Classed to: EN 60825-1:1994 + E.C.1995 + A1:2002 + A2:2001
Operating Manual UC199
Copyright Silca 2012
9