1.6 ACCESSORIES PROVIDED
UC199 comes with a set of accessories for its operation and maintenance (tools, hex wrenches, fuses) supplied
in a special tool kit comprising:
tools kit 4 mm allen key
template Z3 (regulating key)
tip stop with notch 5 mm allen key Z4 serial test connector
tip stop 6 mm allen key Z19 template for Zero machine
Cutter release rod 6.3 Amp fuse - delayed Z20 template
10 mm spanner 4 Amp fuse - delayed ø 1,7 mm steel pin
13 mm spanner 2 Amp fuse - delayed ø 1,2 mm steel pin
14 mm spanner 5 Amp fuse rapid (for 230V)
10 Amp fuse rapid (for 100V)
Slanted brush
2 mm allen key 10 Amp fuse - delayed Emergency button release clip
2,5 mm allen key Serial cable 9/9 Laser warning labels
3 mm allen key 3 mm allen key USB serial cable
Operating Manual UC199
Copyright Silca 2012
10
To Next Page
Loading...
