1 MACHINE DESCRIPTION
UC199 is an electronic machine operating on two axes with controlled
movement (3rd axis only with OPTIONAL Loader Unit). Accurately studied,
it adds a high degree of cutting precision to operating speed and ease of
use.
UC199 can operate by:
• Reading a key with a laser reader and duplicating it
• Connecting to a PC and using Silca software
Fig. 3
UC199 is used to cut the following types of keys:
only with
UC199 JAPAN
Fig. 4
ATTENTION: keys with cuts that
begin before Stop 0 cannot be cut.
Fig. 5
Operating Manual UC199
Copyright Silca 2012
4
To Next Page
Loading...
