Silca UC 199 - Operating Guide

5 OPERATING GUIDE
INTRODUCTION
The Operating Guide below gives instructions on how to use the UC199 automatic key-cutting machine.
All operations are described to facilitate use of the machine.
Tofacilitatedescribingtheoperationswehavesummarisedthetwo“possible”machinecongurationsasfollows:
UC199 WITH STANDARD CONFIGURATION:
• Cutting side standard clamp (L100)
• Standard optic reader clamp (L100)
Fig. 39
UC199 WITH LOADER UNIT CONFIGURATION (OPTIONAL):
• Key blank loader
• Cutting side automatic clamp (L1)
• Standard optic reader clamp (L100)
Fig. 40
Operating Manual UC199
Copyright Silca 2012
27