EasyManua.ls Logo

Silca UC 199 - 8 Disposing of Machine

Silca UC 199
107 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 DISPOSING OF MACHINE
To dispose the machine, it must be rendered unusable by carrying out the operations listed below:
• Deactivation of the electricity supply;
• Separation of the plastic and metal parts;
• Remove the lithium battery from the electronic board.
ATTENTION: the lithium battery must be disposed of in the special containers.
When these operations have been carried out, the machine can be disposed of according to the current regulations
in the country of use.
Waste disposal
CEE standards state special regulations for waste disposal (**).
Machine
The UC199, is made up of recyclable parts. Recycling is ecologically recommended.
Packing
The packing in which the machine is transported is made of cardboard and wood therefore can be re-used if intact
or if dismantled used as combustible materials.
Warning! Take great care when dismantling the packing as it contains nails, which could cause injuries. We
recommend to bend the nails downwards into the wood with a hammer or to completely remove the nails disposing
them in authorized metal recycling centres.
The packing is considered solid urban waste and must not be thrown into the environment but placed in special
cardboard collection bins.
Waste deriving from key cutting
Thewastederiving fromkey cuttingis classiedspecialwaste, butis stillclassied assolidurban waste,as
metalwool.Suchwastemustbedisposedofinspecialcollectioncentresaccordingtotheclassicationassigned
to them by the current EEC law. The circumstances which transform metal residue from solid urban waste into
contaminated or toxic noxious waste are listed in the appendices to the current European Union regulations
regarding disposal of such waste.
INFORMATION FOR USERS
as per art. 10 of Directive 2002/96/CE of 27/01/2003
regarding waste from electric and electronic appliances (RAEE),
• The symbol illustrated above, also found on the machine, indicates that it has been placed on the market and must be included in
separate rubbish collection when the user wishes to dispose of it (including all components, sub-assemblies and consumables that are
integrated in the product).
• For information about the collection system for such appliances please contact SILCA S.p.A. or another subject registered in the various
National Rolls for other countries in the European Union. Household waste (or of similar origin) can be included in the separate collection
system for urban waste.
• On purchasing a new appliance of equivalent type, the old one can be consigned to the dealer. The dealer will then contact whoever is
responsible for collecting the appliance.
• Suitable separate collection of the unused appliance and its dispatch for treatment, recovery and environmentally compatible disposal,
makes it possible to avoid potential negative effects on the environment and human health, and aids recycling and the recovery of the
materials used.
• Unauthorised disposal of the product by users involves the application of the sanctions provided for in received Directives 91/156/CE
and 91/689/CE.
(**) Waste is any substance or object deriving from human activity or natural cycles, disposed off or to be disposed off.
Operating Manual UC199
Copyright Silca 2012
88

Table of Contents

Related product manuals