Silca UC 199 - Page 6

TERMINOLOGY
For those inexperienced in the subject of keys and key cutting, below is an illustration of the most frequently used
terms:
Fig. 2
1) Head
2) Neck
3) Stop
4) Stem
5) Tip
6) Back
7) Cuts
8) Diameter
GRAPHICS IN THE USER’S MANUAL
Pay attention
Obligation to read
the manual
GRAPHICS ON THE UC199 KEY-CUTTING MACHINE
Obligatory use of
safety goggles
Laser warning labels (ch.1.2)
Operating Manual UC199
Copyright Silca 2012
2