Simplex 4010ES Installation Guide

4-4
Optional modules, continued
Remote devices
Table 4-4. Remote power and notification devices installation instructions
PID Description
Installation
instructions
4010-9818 Wired Network Media Card 579-956
4010-9819 Fiber Optic Network Media Card 579-956
4009-9401 4009T TrueAlert Controller 574-762
4081-9306
4100U External Battery Charger 120V (with cabinet,
holds 11 Ah batteries)
579-268
4009-9201 4009A 120V 574-181
4009-9202CA 4009A 120V ULC-listed model 574-181
4009-9301 4009A 240V 574-181
4009 Remote TrueAlert Power Supply (TPS)
4009-9813 Transponder Interface Card (TIC) 579-875
4100-5120 120 V Domestic TPS 579-875
4100-5121 120 V Canadian TPS 579-875
4100-5122 220-240 V International TPS 579-875
Table 4-5. Remote display and annunciation devices installation instructions
PID Description
Installation
instructions
4100-9401 Remote InfoAlarm - Red 579-687
4100-9402 Remote InfoAlarm - Beige 579-687
4100-9421 Remote InfoAlarm (French) - Red 579-687
4100-9422 4100-9422 Remote InfoAlarm (French) - Beige 579-687
4100-9441 Remote InfoAlarm (international) - Red 579-687
4100-9442 Remote InfoAlarm (international) - Beige 579-687
4100-7401 24-Point I/O Graphic Module (requires mounting cabinet) 574-348
4606-9102 4010ES RUI LCD Annunciator 579-977

Simplex 4010ES Specifications

General

Control Panel Type	Addressable Fire Alarm Control Panel
Display	LCD
Operating Temperature	32°F to 120°F (0°C to 49°C)
Power Supply	120V AC or 240V AC
Zones	10
Communication Ports	RS-232, Ethernet
Signaling Line Circuits (SLCs)	2
Notification Appliance Circuits (NACs)	4
Max Notification Appliances	Varies based on NAC configuration and power supply
Communication Options	Cellular, Ethernet
Weight	30 lbs
Humidity Range	Up to 93% non-condensing
Certifications	UL, FM, CSFM, MEA
Network Capability	Yes