Simplex 4010ES Installation Guide

A-1
Appendix A
ULC programming requirements
Introduction This appendix discusses the programming operations that must be met to comply with
Canadian Underwriter’s Laboratory (ULC) standards.
In this chapter This chapter covers the following topics:
Topic Page
Common earth fault ground indicator A-2
Simultaneous alarm display A-4
Setting alarm verification timer to Canadian operation A-7
Setting Alarm Reset/Inhibit Timer A-8
Alarm Cutout Timer A-9

Simplex 4010ES Specifications

General

Control Panel Type	Addressable Fire Alarm Control Panel
Display	LCD
Operating Temperature	32°F to 120°F (0°C to 49°C)
Power Supply	120V AC or 240V AC
Zones	10
Communication Ports	RS-232, Ethernet
Signaling Line Circuits (SLCs)	2
Notification Appliance Circuits (NACs)	4
Max Notification Appliances	Varies based on NAC configuration and power supply
Communication Options	Cellular, Ethernet
Weight	30 lbs
Humidity Range	Up to 93% non-condensing
Certifications	UL, FM, CSFM, MEA
Network Capability	Yes