CA42/50/52 NAV menus & navigation examples Chapter 6
80
suggested).
This will activate the pop-up window ‘Navigate in track’ - now follow
the procedures from the ) a few lines further ahead.
From the menu:
MENU
Call up the menu bar, and…
4,4
select Track navigation
) This will activate the pop-up window ‘Navigate in track’ from
where you can choose which track you wish to select for navigation:
+/-
Scroll up/down in the track list until the correct track number / name
appears
Use the cursor to move around in the window if anything needs to be
changed – such as Direction in track, etc.
0-9
Key in the number of the first trackpoint you wish to sail to
Navigate in track:
Track: TRACK 1 0001
Trackpoint: 00001
Bearing: 224° Distance: 0.000nm
Direction in track: FORWARD
XTE alarm: 00.10 OFF
Auto trackpoint shift: WP-circle
Navigation mode: RHUMBLINE
Beep at trackpoint shift: OFF
ENT
Start navigation
A course line will now be drawn from ship’s position to the first point
of destination.
To Next Page
Loading...
Need help?
General
