Simrad GO12 XSE User Manual

The autopilot will engage in the selected mode, and the autopilot
controller will change to show active mode options.
To disengage the autopilot:
• Select the standby button
When the autopilot is in standby, the boat must be steered
manually.
Autopilot indication
The status bar shows autopilot information as long as an autopilot
computer is connected.
Autopilot modes
The autopilot has several steering modes. The number of modes
and features within the mode depend on the autopilot computer,
the boat type and available inputs.
Non-Follow Up mode (NFU)
In this mode the port and starboard buttons are used to control the
rudder.
Activate this mode by selecting the port or starboard button when
the autopilot is in standby.
To change the rudder position
• Select a port or starboard button.
The rudder moves as long as the button is pressed.
100
Outboard autopilot | GO XSE/XSR Operator Manual

Simrad GO12 XSE Specifications

General

Brand	Simrad
Model	GO12 XSE
Category	Marine Equipment
Language	English