Multiple panel pages
Panel sizes in a multiple panel page can be adjusted from the
System Controls dialog. Refer to "Adjusting the split on multiple panel pages"
on page 31.
In a multiple panel page, only one panel can be active at a time. The
active panel is outlined with a border.
You can only access the menu of an active panel.
2 panels page 3 panels page
The shadow cursor on a multiple panel page
When using the cursor on a sonar (sonar, DownScan, or SideScan)
image on a multiple panel page, the cursor is shadowed on the
other sonar (sonar, DownScan, and SideScan), chart and radar
panels.
Customizing favorite pages
Customizing your system | GO XSE/XSR Operator Manual
27
To Next Page
Loading...
