Using your phone with the MFD
About phone integration
The following functions are available when connecting a phone to
the unit:
• read and send text messages
• view caller ID for incoming calls
Ú
Note: It is possible to use a smartphone to remotely control the
MFD. See "Remote control of the MFD" on page 205.
iPhone limitations:
• only incoming calls and messages received while the phone is
connected to the MFD are available
• messages cannot be sent from the MFD. iPhone does not
support sending messages from connected Bluetooth devices.
Connecting and pairing a phone
Ú
Note: Bluetooth must be enabled on your phone before you
can connect to the MFD.
Ú
Note: If you want to pair a phone while another phone is
connected to the MFD, see "Managing Bluetooth devices" on page 211.
Ú
Note: You must always connect to a phone
from the MFD, not
the other way around.
Use the phone icon in the toolbar to connect your phone to the
MFD. When the icon is selected the following happens:
• Bluetooth is turned ON in the MFD
• the Bluetooth dialog opens, listing all Bluetooth enabled devices
within range
To pair a phone listed as other devices in the dialog:
25
208
Using your phone with the MFD | GO XSE/XSR Operator
Manual
To Next Page
Loading...
Need help?
General
