The autopilot will engage in the selected mode, and the autopilot
controller will change to show active mode options.
To disengage the autopilot:
• Select the standby button
When the autopilot is in standby, the boat must be steered
manually.
Autopilot indication
The status bar shows autopilot information as long as an autopilot
computer is connected.
Autopilot modes
The autopilot has several steering modes.
Anchor modes
In these modes the trolling motor maintains the vessel position at a
selected location.
Ú
Note: When in anchor mode, the vessel heading can be
affected by wind or current.
The following anchor options are available:
Cursor
Navigates to cursor position, and then maintains the vessel at that
position.
90
Trolling motor autopilot | GO XSE/XSR Operator Manual
To Next Page
Loading...
Need help?
General
