Displaying information about chart items
When you select a chart item, a waypoint, a route, or a target, basic
information for the selected item is displayed. Select the chart item's
pop-up to display all available information for that item. You can
also activate the detailed information dialog from the menu.
Ú
Note: If you are viewing applicable C-MAP charts on your
system, you can select marine objects to display information
about services and available multimedia (photos) associated
with the location or object.
Ú
Note: Pop-up information has to be enabled in chart settings to
see basic item information.
Using the cursor on the panel
By default, the cursor is not shown on the panel.
When you activate the cursor, the cursor position window is
displayed. When the cursor is active, the panel does not pan or
rotate to follow the vessel.
Go to cursor
You can navigate to a selected position on the image by positioning
the cursor on the panel, and then using the go to cursor menu
option.
Charts | GO XSE/XSR Operator Manual
37
To Next Page
Loading...
Need help?
General
