Dangerous target alerts
When a vessel meets the dangerous target criteria set in the Vessels
and tracked targets dialog (TCPA/CPA settings) and if the
Dangerous target alert option in the Alarms settings dialog is
enabled, a dangerous target alert message dialog is displayed. The
following options are available in the message dialog:
• Disable, closes the message dialog and cancels the dangerous
target alert for all vessels. You can re-enable the dangerous vessel
alert in the Vessels section of the Alarms settings dialog.
Ú
Note: When Disable is selected, the Dangerous target alert
option in the Alarms settings dialog is turned off. When the
Dangerous target alert option is turned off (disabled),
dangerous target alert messages are not generated for either
radar or AIS dangerous targets.
• Ignore, closes the message dialog and disables the alert for that
vessel. The alert for that vessel will reappear if the status of that
vessel changes, i.e. that vessel becomes safe and then dangerous
again.
• View, closes the message dialog and opens the chart panel with
the dangerous vessel’s pop-up activated. You can select the
vessel’s pop-up in the chart panel to see the AIS vessel details.
AIS target symbols and icons
Symbol Description
AIS target, stationary or moving if no extension lines
enabled
AIS dangerous target (yellow). The yellow color is
shown when the radar palette is black/red or black/
green.
AIS dangerous target (purple). The purple color is
shown when the radar palette is white/red.
AIS dangerous target (red). The red color is shown
when the radar palette is black/yellow.
AIS | GO XSE/XSR Operator Manual
141
To Next Page
Loading...
Need help?
General
