Navigating
About navigating
The navigation function included in the system allows you to
navigate to the cursor position, to a waypoint, or along a predefined
route.
If autopilot functionality is included in your system, the autopilot
can be set to automatically navigate the vessel.
For information about positioning waypoints and creating routes,
refer to "Waypoints, routes, and tracks" on page 53.
Navigation panels
The Nav panel
The Nav panel is activated from the Home page, either as a full page
panel or as part of a split page.
A Data fields
B Vessel heading
C Bearing to next routepoint
D Route information
Indicates the distance of the route, the route name, and the
estimated time to reach the end of the route.
6
Navigating | GO XSE/XSR Operator Manual
63
To Next Page
Loading...
Need help?
General
