Alarms
About the alarm system
The system continuously checks for dangerous situations and
system faults while the system is running.
Type of messages
The messages are classified according to how the reported situation
affects your vessel. The following color codes are used:
Color Importance
Red Critical
Orange Important
Yellow Standard
Blue Warning
Green Light warning
Alarm indication
An alarm situation is indicated with:
• an alarm pop up message
• an alarm icon in the status bar, and with the status bar pulsing
with the color of the alarm
If you have enabled the siren, the alarm message is followed by an
audible alarm.
A single alarm is displayed with the name of the alarm as the title,
and details for the alarm.
If more than one alarm is active at the same time, the alarm pop-up
can display 3 alarms. The alarms are listed in the order they occur
with the last activated alarm at the top. The remaining alarms are
available in the alarms dialog.
Acknowledging a message
The alarm dialog options for acknowledging a message vary
depending on the alarm:
22
198
Alarms | GO XSE/XSR Operator Manual
To Next Page
Loading...
Need help?
General
