Simrad GO12 XSE User Manual

• To show the depth from the lowest point of the vessel to the
bottom, set the offset equal to the vertical distance between the
transducer and the lowest part of the vessel, A (negative value).
• To show the depth from the water surface to the bottom, set the
offset equal to the vertical distance between the transducer and
the water surface, B (positive value)
• For depth below transducer, set the offset to 0.
178
ForwardScan | GO XSE/XSR Operator Manual

Simrad GO12 XSE Specifications

General

Brand	Simrad
Model	GO12 XSE
Category	Marine Equipment
Language	English