Connecting to an MFD acting as an access point
If you do not have access to a WiFi network, you can connect your
phone/tablet directly to the MFD.
The MFD network name (SSID) will be displayed as an available
network in the phone/tablet.
Using the Link app
Start the Link app to display MFD(s) available for remote control. The
list includes both connected and not connected MFDs.
Select the MFD you want to control. If the MFD is not connected,
follow the instructions on the MFD and on the table/phone to
connect.
206
Remote control of the MFD | GO XSE/XSR Operator
Manual
To Next Page
Loading...
