SMC Networks SMC6750L2

TigerSwitch 10/100
50-Port Layer 2 Switch
◆ 48 10BASE-T/100BASE-TX auto-MDI/MDI-X ports
◆ 2 auto-MDI/MDI-X 10/100/1000BASE-T combo ports
with associated SFP slots
◆ Non-blocking switching architecture
◆ Support for redundant power unit
◆ Spanning Tree Protocol
◆ Up to six LACP or static 4-port trunks
◆ Layer 2/3/4 CoS support through four priority queues
◆ Full support for VLANs with GVRP
◆ IGMP multicast filtering and snooping
◆ Manageable via console, Web, SNMP/RMON
Management Guide
SMC6750L2

SMC Networks SMC6750L2 Specifications

General

Brand	SMC Networks
Model	SMC6750L2
Category	Switch
Language	English

Summary

Switch Management

Connecting to the Switch

Establishes initial network connection and configuration options for the switch.

Remote Connections

Basic Configuration

Covers initial setup tasks including console access, passwords, and IP addressing.

Configuring the Switch

Using the Web Interface

Guides on accessing and utilizing the switch's web-based management interface.

Displaying System Information

Setting the IP Address

Details manual and dynamic methods for configuring the switch's IP address.

Security

Managing Firmware

Saving or Restoring Configuration Settings

Port Trunk Configuration

Configuring SNMP

Covers configuring SNMP access, community strings, and trap managers for network monitoring.

IGMP Snooping Commands

Details configuration of IGMP snooping for efficient multicast traffic management.

Priority Commands

Allows specifying packet precedence and mapping priority tags to switch queues.

Command Line Interface

Using the Command Line Interface

Console Connection

Telnet Connection

Entering Commands

Appendix A Troubleshooting

Troubleshooting Chart

Provides a table of common symptoms and their corresponding actions for troubleshooting.

Upgrading Firmware via the Serial Port

Step-by-step guide for updating switch firmware using a serial connection.