SMC Networks SMC6750L2

F LASH /F ILE C OMMANDS
3-21
Command Mode
Privileged Exec
Command Usage
• If the file type is used for system startup, then this file cannot be
deleted.
• “Factory_Default_Config.cfg” cannot be deleted.
Example
This example shows how to delete the test2.cfg configuration file from
Flash memory.
Related Commands
dir
dir
Use this command to display a list of files in Flash memory.
Syntax
dir [boot-rom | config | opcode [:filename]]
The type of file or image to display includes:
• boot-rom
- Boot ROM (or diagnostic) image file
• config - Switch configuration file
• opcode - Run-time operation code image file.
• filename - Name of the file or image. If this file exists but contains
errors, information on this file cannot be shown.
Default Setting
None
Console#delete test2.cfg
Console#