SMC Networks SMC6750L2

C OMMAND L INE I NTERFACE
3-24
Example
Related Commands
dir
whichboot
System Management Commands
These commands are used to control system logs, passwords, user name,
browser configuration options, and display or configure a variety of other
system information.
Console(config)#boot system config: startup
Console(config)#
Command Function Mode Page
Device Description Command
hostname Specifies or modifies the host name for the
device
GC 3-25
User Access Commands
enable password Sets a password to control access to various
privilege levels
GC 3-27
Web Server Commands
ip http port Specifies the port to be used by the Web
browser interface
GC 3-28
ip http server Allows the switch to be monitored or
configured from a browser
GC 3-29
Event Logging Commands
logging on Controls logging of error messages GC 3-29
logging history Limits syslog messages sent to the SNMP
network management station based on
severity
GC 3-30
clear logging Clears messages from the logging buffer PE 3-32
show logging Displays the state of logging PE 3-32