SMC Networks SMC6750L2 User Manual

S YSTEM M ANAGEMENT C OMMANDS
3-31
• level - One of the level arguments listed below. Messages sent include
the selected level up through level 0.
Default Setting
Flash: errors (level 3 - 0)
RAM: warnings (level 7 - 0)
Command Mode
Global Configuration
Command Usage
Sending syslog messages to the SNMP network management station
occurs when you enable syslog traps with the snmp enable traps
command.
Example
Related Commands
snmp-server enable traps
snmp-server host
Level Argument Level Description Syslog Definition
emergencies 0 System unusable LOG_EMERG
alerts 1 Immediate action needed LOG_ALERT
critical 2 Critical conditions LOG_CRIT
errors 3 Error conditions LOG_ERR
warnings 4 Warning conditions LOG_WARNING
notifications 5 Normal but significant
condition
LOG_NOTICE
informational 6 Informational messages
only
LOG_INFO
debugging 7 Debugging messages LOG_DEBUG
Console(config)#logging history ram 0
Console(config)#

SMC Networks SMC6750L2 Specifications

General

Brand	SMC Networks
Model	SMC6750L2
Category	Switch
Language	English