SMC Networks SMC6750L2

S YSTEM M ANAGEMENT C OMMANDS
3-25
hostname
Use this command to specify or modify the host name for this device. Use
the no form to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
System Status Commands
show
startup-config
Displays the contents of the configuration file
(stored in Flash memory) that is used to start
up the system
PE 3-33
show
running-config
Displays the configuration data currently in
use
PE 3-35
show system Displays system information NE,
PE
3-36
show users Shows all active console and Telnet sessions,
including user name, idle time, and IP address
of Telnet client
NE,
PE
3-36
show version Displays version information for the system NE,
PE
3-37
Console(config)#hostname SMC6750L2
Console(config)#
Command Function Mode Page